Wednesday, February 3, 2010

Sources of Occupational Injuries.

The sources of lead hazards can be caused by several factors, among others:
State machinery, aircraft, work tools, and materials, Work environment, Nature of the job, How it works, Production process or the execution of work.

Occupational safety and health can be achieved if the employees or labor:
1. Knowing the correct working procedures.
2. Knowing the danger that the object of work.
3. Knowing the work equipment.
4. Knowing how to work safety practices.

Risk management (risk management) is a process that defines the scope of work, identify sources of potential accidents and ultimately determine rare or controls to reduce risk. Manejemen implementation risk through several phases as follows:

1. Determination of the scope of the project or work with a set of project objectives, where, when, and how it will be done and who worked with the qualification concerned with knowledge, skills, and expertise of each personnel.
2. Identify materials and processes used.
3. Determining the source of workplace accidents that accompany that process will be done by looking for information about the materials used, hazards, and possible errors that can lead to workplace accidents.
4. Evaluation of the risk level of work.
5. Determination and control measures to be taken, such as special handling of materials, labor protection equipment, and the use of special procedures of handling the process.
6. Monitoring and reporting throughout the process as well if there is a change of materials, processes, or procedures.

Factors that influence the emergence of major hazards in industrial and laboratory processes including temperature, pressure, and concentration of reactant substances. High temperatures required in order to increase the speed of chemical reactions in the industry, it's just a tool against Suu resistance should be considered. High pressure needed to accelerate the reaction, but if the system pressure exceeds the permitted limit of explosion can occur. Moreover, if the process carried out at high temperature and the reactor is not strong anymore weight. Concentration of high reactant can cause corrosive to the reactor and can reduce peralataan age. Besides the material properties such as combustible materials, explosive, toxic materials, or can damage the human body.

The sources of lead hazards can be caused by several factors, among others:
State machinery, aircraft, work tools, and materials, Work environment, Nature of the job, How it works, Production process or the execution of work.

Occupational safety and health can be achieved if the employees or labor:
1. Knowing the correct working procedures.
2. Knowing the danger that the object of work.
3. Knowing the work equipment.
4. Knowing how to work safety practices.

Risk management (risk management) is a process that defines the scope of work, identify sources of potential accidents and ultimately determine rare or controls to reduce risk. Manejemen implementation risk through several phases as follows:

1. Determination of the scope of the project or work with a set of project objectives, where, when, and how it will be done and who worked with the qualification concerned with knowledge, skills, and expertise of each personnel.
2. Identify materials and processes used.
3. Determining the source of workplace accidents that accompany that process will be done by looking for information about the materials used, hazards, and possible errors that can lead to workplace accidents.
4. Evaluation of the risk level of work.
5. Determination and control measures to be taken, such as special handling of materials, labor protection equipment, and the use of special procedures of handling the process.
6. Monitoring and reporting throughout the process as well if there is a change of materials, processes, or procedures.

Factors that influence the emergence of major hazards in industrial and laboratory processes including temperature, pressure, and concentration of reactant substances. High temperatures required in order to increase the speed of chemical reactions in the industry, it's just a tool against Suu resistance should be considered. High pressure needed to accelerate the reaction, but if the system pressure exceeds the permitted limit of explosion can occur. Moreover, if the process carried out at high temperature and the reactor is not strong anymore weight. Concentration of high reactant can cause corrosive to the reactor and can reduce peralataan age. Besides the material properties such as combustible materials, explosive, toxic materials, or can damage the human body.

1 comments :

  1. Jay Parmar said...

    The workplace accidents are very common. It mostly occurs due to the lack of safety and security measures provided by a company to its workers. If you are involved in a work accident you have a right to make a compensation claim. In order to make the claiming process easy you should follow the basic steps given below:

    * Get advice and medical attention from a doctor.
    * Report your accident to your employer and record it in the employer's accident book.
    * Collect all evidences and details of witness.
    * Look for help and guidance of a work accident solicitor.
    Visit work accident claims for more information.

Post a Comment

you give times, i give you world,
if you have a website or something, please at the contents. thanks..

best regards,